John Deere 50 Series, Classic 2650 Engine PARTS
Cylinder Head Gasket
Rocker Cover Gaskets
-
Rocker Cover Gasket 4 Cyl suitable for John Deere - R73521 T20075 Rocker Cover Gasket 4 Cyl104,61 kr Incl. Tax 83,69 kr Excl. Tax4-7 working daysPart No.81252 -
Rocker Cover Gasket suitable for John Deere - AR100596 R68227 R73521 Use With Metal Rocker Cover.140,16 kr Incl. Tax 112,13 kr Excl. Tax4-7 working daysPart No.1478
Valve Kits
-
Valve Train Kit suitable for John Deere - Consists of; 4 x Inlet Valve, STD 4 x Exhaust Valve, STD 8 x Valve Spring, Inner 8 x Valve Stem Cap2 216,03 kr Incl. Tax 1 772,82 kr Excl. Tax4-7 working daysPart No.1499
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm123,20 kr Incl. Tax 98,56 kr Excl. Tax4-7 working daysPart No.1495
Valve Collets
-
Valve Collet suitable for John Deere - T20070 T20077 Valve Collet, Supplied Singularly, Not a Pair. Customers Should Order Two Collets If They Require A Pair.18,61 kr Incl. Tax 14,89 kr Excl. Tax4-7 working daysPart No.81254 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)36,39 kr Incl. Tax 29,11 kr Excl. Tax4-7 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm62,01 kr Incl. Tax 49,61 kr Excl. Tax4-7 working daysPart No.1496 -
Valve Tappet suitable for John Deere - T20073 Valve Tappet186,05 kr Incl. Tax 148,84 kr Excl. Tax4-7 working daysPart No.1502
Rocker Components
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees346,88 kr Incl. Tax 277,50 kr Excl. Tax4-7 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees496,13 kr Incl. Tax 396,90 kr Excl. Tax4-7 working daysPart No.1464
Cylinder Block
-
Liner O-ring Kit - AR65507 suitable for John Deere - AR65507 Liner O-ring KitThe Liner O-Ring Kit provides a secure, leak-proof seal between the engine liner and cylinder block, preventing coolant and oil lea... Show More0,00 kr Incl. Tax 0,00 kr Excl. TaxOut of stockPart No.001-65507
Engine Kits
-
Engine Overhaul Kit suitable for John Deere - Consists of; 4 x Cylinder Kit 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 4 x Small End Bush- 41mm Piston Pin 2 x Cylinder Head Stud (Pack Of 9)8 146,08 kr Incl. Tax 6 516,86 kr Excl. TaxOut of stockPart No.1470
Oil Cooler
-
Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.1 757,11 kr Incl. Tax 1 405,69 kr Excl. Tax4-7 working daysPart No.8089 -
Oil Cooler - RE61767 suitable for John Deere - RE61767 Oil Cooler suitable for John DeereDimensionsThickness: 40mmWater Outlets Diameter: 16mm0,00 kr Incl. Tax 0,00 kr Excl. Tax4-7 working daysPart No.77067
Oil Pumps
-
Oil Pump Assembly suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt Holes1 588,85 kr Incl. Tax 1 271,08 kr Excl. TaxOut of stockPart No.1504 -
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt3 814,38 kr Incl. Tax 3 051,50 kr Excl. TaxOut of stockPart No.1505 -
Engine Oil Pump Pipe suitable for John Deere - R113752 Engine Oil Pump Pipe310,08 kr Incl. Tax 248,06 kr Excl. Tax4-7 working daysPart No.81246 -
Oil Pump Assembly - RE55343 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 3 Bolt HolesShow More0,00 kr Incl. Tax 0,00 kr Excl. Tax4-7 working daysPart No.1504A
Piston Engine
-
Piston, Pin & Clips suitable for John Deere - AR71067 AR87748 RE19278 Crown diameter; 104.750mm.Skirt diameter: 106.390mm.Compression height: 66.300mm.Overall height: 111.970mm.Chamber diameter: 58.420mm.Chamber depth: 18.620mm.Pi... Show More1 136,95 kr Incl. Tax 909,56 kr Excl. Tax4-7 working daysPart No.1445
Piston, Ring & Liner Kit suitable for John Deere - DD14529 RE15597 RE15600 Includes Liner O-Rings.2 273,91 kr Incl. Tax 1 819,13 kr Excl. Tax4-7 working daysPart No.1446
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.413,44 kr Incl. Tax 330,75 kr Excl. Tax4-7 working daysPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.713,19 kr Incl. Tax 570,55 kr Excl. Tax4-7 working daysPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner527,14 kr Incl. Tax 421,71 kr Excl. Tax4-7 working daysPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 160482,69 kr Incl. Tax 66,15 kr Excl. Tax4-7 working daysPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)165,38 kr Incl. Tax 132,30 kr Excl. TaxOut of stockPart No.1483 -
Sump Gasket Cork suitable for John Deere - R49515 R97342 R522030 Cork Alternative to 1483 (Paper)206,73 kr Incl. Tax 165,38 kr Excl. Tax4-7 working daysPart No.1481
Crankshafts
-
Crankshaft - RE20585 suitable for John Deere - RE20585 RE36605 Long nose for tractors with hydraulic pump driven of crank.Nose Length - 60mm.10 697,70 kr Incl. Tax 8 558,16 kr Excl. Tax4-7 working daysPart No.72277 -
Crankshaft (Genmot) suitable for John Deere - RE56792 Crankshaft (Genmot)Currently unavailablePart No.72279 -
Crankshaft 4202D 4219D 4239D 4239T suitable for John Deere - AT18030 AT72949 RE33197 CrankshaftJohn Deere Tractor Engines 4202D, 4219D, 4239D, 4239T.
Short Nose for Tractors without Crank Driven Hydraulic Pump.Mains: 3.1235"/3.124"Conrods: 2.7485"/2.749"... Show More9 147,31 kr Incl. Tax 7 317,85 kr Excl. Tax4-7 working daysPart No.8459
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs130,24 kr Incl. Tax 104,19 kr Excl. Tax4-7 working daysPart No.1488 -
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs120,73 kr Incl. Tax 96,58 kr Excl. Tax4-7 working daysPart No.1488A -
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs120,73 kr Incl. Tax 96,58 kr Excl. Tax4-7 working daysPart No.1488C -
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs120,73 kr Incl. Tax 96,58 kr Excl. Tax4-7 working daysPart No.1488B
Main Bearings
-
Main Bearing Set +0.030" - John Deere AT21136 suitable for John Deere - AT21136 RE27368 Main Bearing Set +0.030" - John Deere AT21136, RE273681 571,06 kr Incl. Tax 1 256,85 kr Excl. Tax4-7 working daysPart No.1485C -
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.413,44 kr Incl. Tax 330,75 kr Excl. Tax4-7 working daysPart No.1486 -
Main Bearing Set +0.010" - John Deere AT21132 suitable for John Deere - AT21132 RE27353 Main Bearing Set +0.010" - John Deere AT21132, RE273531 571,06 kr Incl. Tax 1 256,85 kr Excl. TaxOut of stockPart No.1485A
Conrods
-
Conrod - RE16494 suitable for John Deere - AR71068 RE16494 RE42733 Conrod.Small End/Pin size ID: 41mm.Big End ID: 73mm.Total Length: 280mm.Centre to Centre Length: 180mm.950,91 kr Incl. Tax 760,73 kr Excl. Tax4-7 working daysPart No.76365
Conrod Bushes
-
Small End Bush suitable for John Deere - R56186 R57451 RE63913 Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm103,36 kr Incl. Tax 82,69 kr Excl. Tax4-7 working daysPart No.1463
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm103,36 kr Incl. Tax 82,69 kr Excl. TaxOut of stockPart No.1491
Ancillaries Crank
Gears Crank
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal214,99 kr Incl. Tax 171,99 kr Excl. Tax4-7 working daysPart No.1460
Fly Wheel
-
Fly Wheel suitable for John Deere - RE18678 AR103749 AR92508 For Clutch 330mm Diameter With 142 Teeth4 993,81 kr Incl. Tax 3 995,05 kr Excl. Tax4-7 working daysPart No.72550
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm248,06 kr Incl. Tax 198,45 kr Excl. Tax4-7 working daysPart No.1503
Sump Engine
-
Sump Plug Washer suitable for John Deere - T13213 Price is Each (Per Washer)43,83 kr Incl. Tax 35,06 kr Excl. Tax4-7 working daysPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - RE501579 RE524748 RE38857 Bottom Gasket Set678,86 kr Incl. Tax 543,09 kr Excl. Tax4-7 working daysPart No.1454
Air Cleaners
-
Pre Cleaner suitable for John Deere - AL39934 Inlet: 76mm (3"). Bowl: 178mm (7").357,63 kr Incl. Tax 286,10 kr Excl. TaxOut of stockPart No.2245 -
Air Pre-Cleaner suitable for John Deere - Inlet: 80mm.
Bowl: 254mm.909,56 kr Incl. Tax 727,65 kr Excl. Tax4-7 working daysPart No.9993 -
Air Pre-Cleaner Bowl - C9NN9A663A suitable for John Deere - Air Pre-CleanerProduct Info.- Outer Diameter: 260mm- Height: 100mm- Cone Inner Diameter: 145mm0,00 kr Incl. Tax 0,00 kr Excl. TaxOut of stockPart No.77033
Air Filters
-
Air Filter- Inner suitable for John Deere - AL30395 CE16309 L34832 Length:- 331.8MMID:- 73MMOD:- 96MMJD2650 - Spanish Built Tractors Only.917,84 kr Incl. Tax 734,27 kr Excl. TaxOut of stockPart No.10204 -
Fleetguard AF4626 Air Filter - Inner suitable for John Deere - AL30395 CE16309 L34832Fleetguard AF4626 axial seal secondary air filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.Height: 331.72 mmLargest ID: 75.70 mm Show More909,56 kr Incl. Tax 727,65 kr Excl. Tax4-7 working daysPart No.AF4626
Fleetguard AF4058 Outer Air Filter suitable for John Deere - AZ20623 AZ20626 Outer Air FilterDimensionsOD: 163.6mmID: 86.4mmLength: 350.7mm1 215,93 kr Incl. Tax 972,74 kr Excl. Tax4-7 working daysPart No.AF4058
Air Filter- Inner suitable for John Deere - AL58730 AL67195 Length: 235mm.
ID: 76.2mm.
OD: 104mm.682,18 kr Incl. Tax 545,74 kr Excl. TaxOut of stockPart No.10205
Fleetguard AF4564KM Air Filter - Outer suitable for John Deere - AL30394 DE17263Fleetguard AF4564KM Axial Seal Primary Air Filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.DimensionsEnd 2 ID: 88.34 mm Show More2 230,50 kr Incl. Tax 1 784,40 kr Excl. Tax4-7 working daysPart No.AF4564KM
Air Filter Kit suitable for John Deere - AZ20623 AZ20626 AL58730 Air filter kit suitable for John Deere 50 and 55 Series.Contains:Outer Air Filter (Length: 350.7mm).Inner Air Filter (Length: 235mm).Out of stockPart No.FSK-5015Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm. Diameter: 94.1mm177,78 kr Incl. Tax 142,22 kr Excl. Tax4-7 working daysPart No.8493 -
Fleetguard LF678 Oil Filter suitable for John Deere - T19044 T19044T RE507204 Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,294,79 kr Incl. Tax 235,83 kr Excl. Tax4-7 working daysPart No.LF678 -
Oil Filter suitable for John Deere - T19044 T19044T RE507204 Engine oil filterProduct Info:- Height: 138mm- OD: 93mm- Thread Size: 13/16 - 16UNS - 2B0,00 kr Incl. Tax 0,00 kr Excl. TaxOut of stockPart No.77336
Fuel Filters
-
Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mm605,69 kr Incl. Tax 484,55 kr Excl. Tax4-7 working daysPart No.8494
Filter Kits
-
Filter Service Kit suitable for John Deere - 317mm Outer Air Filter. Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Inner Air Filter. 1 x Outer Air Filter. John Deere. 1750 - From Serial Number 622000. 1850 - From Serial Number 622000. 1950 - From Serial Number 622000. 2250 - Fr... Show More3 185,74 kr Incl. Tax 2 548,59 kr Excl. Tax4-7 working daysPart No.FSK-902 -
Filter Service Kit suitable for John Deere - Upto Serial Number 634102. Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)2 687,35 kr Incl. Tax 2 149,88 kr Excl. TaxOut of stockPart No.FSK801
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included496,13 kr Incl. Tax 396,90 kr Excl. Tax4-7 working daysPart No.55008 -
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included646,61 kr Incl. Tax 517,29 kr Excl. Tax4-7 working daysPart No.55016 -
Fuel Lift Pump suitable for John Deere - RE38009 Sofabex Version Lift Pump, Replaces plastic cap version.Gasket Included826,88 kr Incl. Tax 661,50 kr Excl. Tax4-7 working daysPart No.1508
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More24,81 kr Incl. Tax 19,85 kr Excl. Tax4-7 working daysPart No.1513
Fuel Injector - RE31757 suitable for John Deere - AR90023 RE31757 RE37503 Fuel Injector.This Is An Agriline Brand Injector, Agriline Also Supply A Stanadyne Branded Version Of this Injector, Which Is Agriline Part Number 1511, This Can Be Found Within The Related Items Section Opposite.1 447,04 kr Incl. Tax 1 157,63 kr Excl. TaxOut of stockPart No.76118
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm4,14 kr Incl. Tax 3,31 kr Excl. Tax4-7 working daysPart No.1512
Fuel Injector suitable for John Deere - AR90023 RE31757 RE37503 Fuel InjectorStanadyne brand, for Agriline brand please order 761182 480,63 kr Incl. Tax 1 984,50 kr Excl. TaxOut of stockPart No.1511Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere - RE13517 Repairs Fuel Lift Pump 1508330,75 kr Incl. Tax 264,60 kr Excl. Tax4-7 working daysPart No.1509
Fuel Ancillaries
-
Fuel Cap suitable for John Deere - AL34678 Suitable for plastic tank.
183,56 kr Incl. Tax 146,85 kr Excl. Tax4-7 working daysPart No.80134
Throttle Levers
-
Throttle Control Knob L112425 suitable for John Deere - L112425 Throttle Control Knob, redeveloped with a new tool exclusive to Agriline .291,48 kr Incl. Tax 233,18 kr Excl. Tax4-7 working daysPart No.74743
Turbochargers
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere - R521439 R90658 T20006 Exhaust Manifold Gasket41,35 kr Incl. Tax 33,08 kr Excl. Tax4-7 working daysPart No.1507
Silencer Pipe
-
Silencer suitable for John Deere - AL39509 AL31815 AL35753Underhood Silencer- Supplied in a Heat Resistant Matt Black Paint- Pipe Fitting Diameter: 66mm- Silencer Entry: 75mm- Stack Length: 135mm<... Show More3 927,66 kr Incl. Tax 3 142,13 kr Excl. Tax4-7 working daysPart No.1519 -
Silencer Pipe suitable for John Deere - AL34694 Length:1050mm. Diameter: 74mm.1 078,66 kr Incl. Tax 862,93 kr Excl. TaxOut of stockPart No.1575 -
Silencer Pipe suitable for John Deere - AL61139 Overall Length: 1085mm. Inner Collar Diameter: 75mm.1 078,66 kr Incl. Tax 862,93 kr Excl. TaxOut of stockPart No.1596 -
Silencer Pipe suitable for John Deere - AL61138 Length: 1280mm Inner Collar Diameter: 75mm.1 078,66 kr Incl. Tax 862,93 kr Excl. TaxOut of stockPart No.1598
Exhaust Weather Cap
-
3" Weather Cap suitable for John Deere - AR21283 AL28307 Counter balance type weather cap, Suitable for 3" / 76.2mm silencer pipe.165,38 kr Incl. Tax 132,30 kr Excl. TaxOut of stockPart No.75726
Valves Engine
-
Inlet Valve + 0.015 suitable for John Deere - R57427 R89221 + 0.015" Oversize144,70 kr Incl. Tax 115,76 kr Excl. Tax4-7 working daysPart No.1494A -
Inlet Valve STD suitable for John Deere - R51735 R89219 Inlet Valve STD144,70 kr Incl. Tax 115,76 kr Excl. Tax4-7 working daysPart No.1494























































































