John Deere 3010 Series 3310 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526670 RE66082 Head Gasket Set1 236,18 kr Incl. Tax 988,94 kr Excl. TaxOut of stockPart No.50370
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123542 Rocker Cover Gasket289,41 kr Incl. Tax 231,53 kr Excl. TaxOut of stockPart No.1605
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mm123,20 kr Incl. Tax 98,56 kr Excl. Tax4-7 working daysPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)36,39 kr Incl. Tax 29,11 kr Excl. Tax4-7 working daysPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm62,01 kr Incl. Tax 49,61 kr Excl. Tax4-7 working daysPart No.1496 -
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mm62,01 kr Incl. Tax 49,61 kr Excl. Tax4-7 working daysPart No.1616 -
Valve Tappet suitable for John Deere - T20073 Valve Tappet186,05 kr Incl. Tax 148,84 kr Excl. Tax4-7 working daysPart No.1502
Rocker Components
Studs Cylinder Head
-
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees346,88 kr Incl. Tax 277,50 kr Excl. Tax4-7 working daysPart No.1464A -
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees496,13 kr Incl. Tax 396,90 kr Excl. Tax4-7 working daysPart No.1464
Cylinder Block
-
Liner O-ring Kit - AR65507 suitable for John Deere - AR65507 Liner O-ring KitThe Liner O-Ring Kit provides a secure, leak-proof seal between the engine liner and cylinder block, preventing coolant and oil lea... Show More0,00 kr Incl. Tax 0,00 kr Excl. TaxOut of stockPart No.001-65507
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - RE501455 RE527042 RE66086 Complete Gasket Set1 447,04 kr Incl. Tax 1 157,63 kr Excl. TaxOut of stockPart No.50371 -
Complete Gasket Set suitable for John Deere - AR100418 AR68316 AR97176 John Deere. 2630 - Upto Serial Number 325067.2 067,19 kr Incl. Tax 1 653,75 kr Excl. Tax4-7 working daysPart No.1640
Oil Cooler
-
Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.1 757,11 kr Incl. Tax 1 405,69 kr Excl. Tax4-7 working daysPart No.8089 -
Engine Oil Cooler - 5 Plate - RE560753 suitable for John Deere - RE560753 Engine oil cooler suitable for John DeereShow More1 529,73 kr Incl. Tax 1 223,78 kr Excl. Tax4-7 working daysPart No.76549
Oil Pumps
-
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt3 814,38 kr Incl. Tax 3 051,50 kr Excl. TaxOut of stockPart No.1505 -
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump Suitable for John Deere tractors oem number RE502269Show More2 268,95 kr Incl. Tax 1 815,16 kr Excl. Tax4-7 working daysPart No.75570
Balancer Units
-
Balancer Bush - R115299 suitable for John Deere - R115299 ID: 40.2mm.OD: 43.34mm.Height: 27.7mm.121,98 kr Incl. Tax 97,58 kr Excl. Tax4-7 working daysPart No.76577
Piston Engine
-
Piston, Pin & Clips RE28919 suitable for John Deere - RE28919 Piston Length: 120mm.
Chamber Depth: 21.1mm.
Pin: 41.27mm.1 171,28 kr Incl. Tax 937,02 kr Excl. Tax4-7 working daysPart No.1634
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.413,44 kr Incl. Tax 330,75 kr Excl. Tax4-7 working daysPart No.1443 -
Piston Ring Set - RE66271 suitable for John Deere - RE66271 For use with Piston 1600.Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1601FM.372,10 kr Incl. Tax 297,68 kr Excl. Tax4-7 working daysPart No.1601 -
Piston Ring Set, Federal Mogul Brand - RE66271 suitable for John Deere - RE66271 For use with Piston Agriline Part No. 1600.Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1601.4-7 working daysPart No.1601FM -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.713,19 kr Incl. Tax 570,55 kr Excl. Tax4-7 working daysPart No.1443FM
Liners Engine Cyl
-
Liner c/w Seals suitable for John Deere - R116397 R115336 R116383 Bore diameter 106.27 mm Flange diameter 125.80 mm Overall height 218.86 mm Flange width 9.75 mm Outside diameter 120.00 mm
Comes with Sealing Rings.661,50 kr Incl. Tax 529,20 kr Excl. Tax4-7 working daysPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 160482,69 kr Incl. Tax 66,15 kr Excl. Tax4-7 working daysPart No.1450
Engine Sump
-
Sump Plug - R515195 suitable for John Deere - R515195 Sump PlugThe Sump Plug (also known as an oil drain plug) is a critical component used to seal the oil pan on engines and allow for convenient draining du... Show More0,00 kr Incl. Tax 0,00 kr Excl. Tax4-7 working daysPart No.001-515195
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)165,38 kr Incl. Tax 132,30 kr Excl. TaxOut of stockPart No.1483 -
Sump Gasket Cork suitable for John Deere - R49515 R97342 R522030 Cork Alternative to 1483 (Paper)206,73 kr Incl. Tax 165,38 kr Excl. Tax4-7 working daysPart No.1481
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere - R113596 RE504638 RE50618 Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show More12 713,20 kr Incl. Tax 10 170,56 kr Excl. Tax4-7 working daysPart No.1621Main Bearings
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.413,44 kr Incl. Tax 330,75 kr Excl. Tax4-7 working daysPart No.1486
Conrod Bushes
Conrod Bolts & Nuts
-
CONROD BOLT - R501124 suitable for John Deere - R501124 Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.82,69 kr Incl. Tax 66,15 kr Excl. Tax4-7 working daysPart No.76395
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal214,99 kr Incl. Tax 171,99 kr Excl. Tax4-7 working daysPart No.1460
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere - Fly Wheel Ring Gear992,25 kr Incl. Tax 793,80 kr Excl. Tax4-7 working daysPart No.72514
Camshaft
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm248,06 kr Incl. Tax 198,45 kr Excl. Tax4-7 working daysPart No.1503
Sump Engine
-
Sump Plug Washer suitable for John Deere - T13213 Price is Each (Per Washer)43,83 kr Incl. Tax 35,06 kr Excl. Tax4-7 working daysPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - Bottom Gasket Set2 397,94 kr Incl. Tax 1 918,35 kr Excl. Tax4-7 working daysPart No.2552
Air Filters
-
Air Filter- Inner suitable for John Deere - AT171854 Length: 355mm.
I.D: 81mm.
O.D: 98.4mm.
Currently unavailablePart No.1593 -
Air Filter- Outer suitable for John Deere - AT171853 EQ35545/001 RT6005011111 Length: 356.4mm.
I.D: 90.5mm.
O.D: 165.1mm.
Currently unavailablePart No.1592
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm. Diameter: 94.1mm177,78 kr Incl. Tax 142,22 kr Excl. Tax4-7 working daysPart No.8493
Fuel Filters
-
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.760,31 kr Incl. Tax 608,25 kr Excl. Tax4-7 working daysPart No.FS19831 -
Fleetguard FS19838 Fuel Filter suitable for John Deere - RE503747 RE60021 Overall height: 116mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.666,05 kr Incl. Tax 532,84 kr Excl. Tax4-7 working daysPart No.FS19838 -
Fuel Filter 5 Micron Final Filter suitable for John Deere - RE503254 RE50455 RE62418 Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585 -
Secondary Fuel Filter suitable for John Deere - RE503747 RE60021Fuel Filter for John DeereProduct Info:- Filter Type: Spin-On- Length : 71.12 mm- Diameter: 83.058 mm- Micron Rating: 5Show More 0,00 kr Incl. Tax 0,00 kr Excl. Tax4-7 working daysPart No.001-60021
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket Included496,13 kr Incl. Tax 396,90 kr Excl. Tax4-7 working daysPart No.55008 -
Manual Fuel Filter Primer Pump - RE50467 suitable for John Deere - RE50467 Manual Fuel Filter Primer PumpDesigned for quick and efficient fuel system priming, this hand primer is an essential tool for removing air from fuel lines and ensuring a smooth fuel flow to the engine. Ideal for diesel and other fuel sy... Show More0,00 kr Incl. Tax 0,00 kr Excl. TaxOut of stockPart No.001-50467
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere - R71963 Tee fitting for Injectors suitable for John Deere.Thread: M14.289,41 kr Incl. Tax 231,53 kr Excl. Tax4-7 working daysPart No.76562
Fuel Injectors
-
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More24,81 kr Incl. Tax 19,85 kr Excl. Tax4-7 working daysPart No.1513
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 322621 050,14 kr Incl. Tax 840,11 kr Excl. TaxOut of stockPart No.1612
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm4,14 kr Incl. Tax 3,31 kr Excl. Tax4-7 working daysPart No.1512
Fuel Injector suitable for John Deere - RE36939 RE38087 SE501097 Fuel InjectorInjector Nozzle marked with - 284851 157,63 kr Incl. Tax 926,10 kr Excl. Tax4-7 working daysPart No.9487AFuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid372,10 kr Incl. Tax 297,68 kr Excl. Tax4-7 working daysPart No.2074 -
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid496,13 kr Incl. Tax 396,90 kr Excl. Tax4-7 working daysPart No.2073
Fuel Filter Housings
-
Final Fuel Filter Head - RE500160 suitable for John Deere - AL150288 Final fuel filter head.Width: 4".Length: 4.25".1 198,98 kr Incl. Tax 959,18 kr Excl. Tax4-7 working daysPart No.76552
-
























































